Distributor and Manufacturer's Representative ofIndustrial Storage TanksWastewater Treatment EquipmentRelated Specialties

All Categories > Level Indication, Expansion Joints, Fiberglass Ladders, and Specialty Equipment > Expansion Joints > Series 230/220 Rubber Expansion Joints > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Series 230/220 Rubber Expansion Joints

Check up to five results to perform an action.

PROCO Series 230, Styles 231, 232, & 233 Non-Metallic Expansion Joints are designed for tough, demanding industrial applications, as found in: Chemical/Petrochemical Plants, Industrial Process Piping Systems, Marine Services, Power Generation Plants, Pulp/ Paper Plants, Steel Mills, Water/Wastewater and Pollution Control Systems. Installed next to mechanical equipment or between the anchor points of a piping system, specify the PROCO Series 230 to: (1) Absorb Pipe Movement/Stress, (2) Reduce System Noise, (3) Isolate Mechanical Vibration, (4) Compensate Alignment/Offset, (5) Eliminate Electrolysis, (6) Protect Against Start-Up Surge Forces. Our history in the manufacture of expansion joints dates back to l930. When you need an engineered rubber expansion joint solution to a piping problem, call PROCO!

Series 230 Replaces Series 220. The new and improved PROCO Series 230 replaces the PROCO Series 220 rubber expansion joints. (Series 220 products will be available only in short neutral lengths.) This new hand-built product has been completely re-engineered to provide improved strength, flexibility, movement and spring rate capabilities. Manufactured utilizing tire industry technology, the Series 230 combines woven nylon fabric and nylon tire cord into a fabric matrix bonded with elastomer and reinforced with wire to create a product with greater operating performance.

The nomenclature for the new PROCO Series 230 is as follows:
Single Arch Series 230, Style 231
Double Arch Series 230, Style 232
Triple Arch Series 230, Style 233




Compare Items
   
  Results 101 - 125 of 159 Unit of Measure: Imperial  1 2 3 4 5 »  

Item #

Expansion Joint Size

Neutral Length

Axial Compression

Axial Extension

261R-307509 30 in 9 in 0.9 in 0.6 in
261R-3075010 30 in 10 in 2 in 1.0 in
261R-3075012 30 in 12 in 2 in 1.0 in
261R-3075014 30 in 14 in 2 in 1.0 in
261R-3280010 32 in 10 in 2 in 1.0 in
261R-3280012 32 in 12 in 2 in 1.0 in
261R-3280014 32 in 14 in 2 in 1.0 in
261R-3485010 34 in 10 in 2 in 1.0 in
261R-3485012 34 in 12 in 2 in 1.0 in
261R-3485014 34 in 14 in 2 in 1.0 in
261R-3690010 36 in 10 in 2 in 1.0 in
261R-3690012 36 in 12 in 2 in 1.0 in
261R-3690014 36 in 14 in 2 in 1.0 in
261R-3895010 38 in 10 in 2 in 1.0 in
261R-3895012 38 in 12 in 2 in 1.0 in
261R-3895014 38 in 14 in 2 in 1.0 in
261R-40100010 40 in 10 in 2 in 1.0 in
261R-40100012 40 in 12 in 2 in 1.0 in
261R-40100014 40 in 14 in 2 in 1.0 in
261R-42105012 42 in 12 in 2.4 in 1.2 in
261R-42105014 42 in 14 in 2.4 in 1.2 in
261R-44110012 44 in 12 in 2.4 in 1.2 in
261R-44110014 44 in 14 in 2.4 in 1.2 in
261R-46115012 46 in 12 in 2.4 in 1.2 in
261R-46115014 46 in 14 in 2.4 in 1.2 in
  Results 101 - 125 of 159  1 2 3 4 5 »  
www.Core-Rosion.comSite created by ThomasNet Web Solutions and powered by Navigator Platform