Distributor and Manufacturer's Representative ofIndustrial Storage TanksWastewater Treatment EquipmentRelated Specialties

All Categories > Level Indication, Expansion Joints, Fiberglass Ladders, and Specialty Equipment > Level Indicators and Controllers > DataView™ Level Controller > Item # LI55-8211  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # LI55-8211, DataView™ Level Controller



Controller w/2 Relays, 4-20 Repeater





Specifications

Application

The general purpose level controller displays engineering units with one 4-20 mA or 0-10 VDC continuous level sensor input and is offered in three configurations with optional 2 or 4 programmable relays, and an isolated 4-20 mA repeater. Each relay can be configured on a single set point (high level alarm or low level alarm) or latched on two set points for automatic fill or empty in simplex (one pump or valve) or duplex (two pumps) level control modes.

Features of The WASTESAVER

  • LED main display and secondary unit display with relay status
  • Easy configuration via the push button display module
  • DIN enclosure with NEMA 4X faceplate and shallow case
  • Internal sensor power supply with 4-20 mA repeater output
  • Non-volatile memory with security password protection
  • 32-point linearization function for volumetric measurement
  • Display Type

    LED, 6-digit

    Display Units

    Engineering

    Display Output

    -99999 to 999999

    Display Height

    Main: 0.6" (15mm) high
    Secondary: 0.46" (12mm) high

    Decimal Point

    Floating

    LED Indication

    Relay Status

    Configuration

    Push Button

    Memory

    Non-volatile

    Linearization

    2-32 Point Function

    Sensor Input

    (1) 4-20 mA or 0-10 VDC Transmitter

    Supply Voltage

    85-265 VAC @ 50-60 Hz

    Consumption

    20 watts maximum

    Sensor Supply

    24 VDC ± 5% @ 200 mA

    Repeater Output

    4-20 mA, 24 VDC ± 5% @ 40 mA

    Contact type

    -12_1: (2) SPDT relays
    -14_1: (4) SPDT relays

    Contact Rating

    3A @ 30 VDC or 250 VAC resistive load

    Ambient Temp

    -40 to 149 ºF
    -40 to 65
    ºC

    Enclosure Type

    1/8 DIN, Panel Mount

    Enclosure Rating

    NEMA 4X (IP65) Faceplate

    Enclosure Material

    Polycarbonate

    Classification

    General Purpose

    Compliance

    CE

    Approvals

    cULus, UL508

    Ordering Notes

    1. For field mount installation in a NEMA 4X polycarbonate enclosure, order the single or two controller NEMA box.
    2. View expansion cards for the level controller.

    Manufacturer

    Flowline


     DOWNLOADS 

    Data Sheet
    (PDF, 620KB)

    Manual
    (PDF, 1857KB)

    Quick Start
    (PDF, 1453KB)


    www.Core-Rosion.comSite created by ThomasNet Web Solutions and powered by Navigator Platform