Distributor and Manufacturer's Representative ofIndustrial Storage TanksWastewater Treatment EquipmentRelated Specialties

All Categories > Wastewater Treatment Equipment > Continuous and Batch Driers > Evoqua J-Mate Continuous Drier > Item # J-360E  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # J-360E, Evoqua J-Mate Continuous Drier

A pioneer in dewatering technology, Evoqua Water Technologies has established itself as the leading provider of dewatering solutions in a wide range of wastewater and processing applications. Evidence of Evoqua's leadership in metal hydroxide waste reduction is the J-Mate® dryer, a member of the JWI® product family. Designed as a second stage dryer for further reduction after mechanical dewatering, the J-Mate* dryer takes over where the filter press, belt press and centrifuge leave off, producing an extremely dry, easily disposed of material.

The JWI® continuous and batch dryers are designed to reduce disposal costs by removing residual moisture from dewatered cake. Both are designed to be used for second stage volume and weight reduction downstream from a J-Press® filter press or other dewatering system. The continuous J-Mate00 dryer achieves water removal rates from 45 to 190 lbs.(20 KG to 86 KG) per hour in high volume applications; the batch J-Mate® dryer removes 7 to 50 lbs. (3 KG to 23 KG) of moisture per hour in low heat, low volume situations.

ISO 9001:2000 QMS
The quality management system governing the manufacturing of the J-Mate continuous/batch dryers is ISO 9001:2000 certified.

Unit of Measure: Imperial


Heat Source


Water Removal Rate (approx.)

169 lb/hr

480V 3Ø 60 Hz1

140 A

400V 3Ø 50 Hz

165 A


110.7 kW

Burner Element Rating

105 kW

Scrubber Water Usage

3 gpm
2.7 to 4.1
40 to 60

Scrubber Drain

2" NPT Gravity Drain


160 in


112 in


78 in

Weight (shipping, w/o lift)

4400 lb

Std Hopper Capacity

17 ft³

Exhaust Air

325 CFM

Temperature Exhaust Air

71 to 93 ºC
160 to 200




Materials of Construction: 304 SS...Carbon Steel. Urethane Finish
Gas train components are IRI and FM approved, dryers are AGA approved. European dryers meet the EC Directive including VOE electrical and CE approved gas valve.
1 Optional on gas units


·  Siemens J-Mate Continuous Drier-1M

·  Siemens J-Mate Continuous Drier-M


(PDF, 1497KB)

www.Core-Rosion.comSite created by ThomasNet Web Solutions and powered by Navigator Platform