Distributor and Manufacturer's Representative ofIndustrial Storage TanksWastewater Treatment EquipmentRelated Specialties

All Categories > Wastewater Treatment Equipment > Continuous and Batch Driers > Evoqua J-Mate Continuous Drier > Item # J-120G  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # J-120G, Evoqua J-Mate Continuous Drier



A pioneer in dewatering technology, Evoqua Water Technologies has established itself as the leading provider of dewatering solutions in a wide range of wastewater and processing applications. Evidence of Evoqua's leadership in metal hydroxide waste reduction is the J-Mate® dryer, a member of the JWI® product family. Designed as a second stage dryer for further reduction after mechanical dewatering, the J-Mate* dryer takes over where the filter press, belt press and centrifuge leave off, producing an extremely dry, easily disposed of material.

The JWI® continuous and batch dryers are designed to reduce disposal costs by removing residual moisture from dewatered cake. Both are designed to be used for second stage volume and weight reduction downstream from a J-Press® filter press or other dewatering system. The continuous J-Mate00 dryer achieves water removal rates from 45 to 190 lbs.(20 KG to 86 KG) per hour in high volume applications; the batch J-Mate® dryer removes 7 to 50 lbs. (3 KG to 23 KG) of moisture per hour in low heat, low volume situations.

ISO 9001:2000 QMS
The quality management system governing the manufacturing of the J-Mate continuous/batch dryers is ISO 9001:2000 certified.




Unit of Measure: Imperial


Specifications

Heat Source

Gas

Water Removal Rate (approx.)

47 lb/hr

240V 3Ø 60 Hz

20 A

480V 3Ø 60 Hz1

10 A

400V 3Ø 50 Hz

12 A

Power

6.7 kW

Burner Element Rating

125000 Btu
131850
KJ/hr

Natural Gas Consumption

125 cfh

LP Gas Consumption

1.2 gph
4.5
lph

Scrubber Water Usage

1 gpm
2.7 to 4.1
bar
40 to 60
psi
3.8
lpm

Scrubber Drain

2" NPT Gravity Drain

Length

160 in

Width

60 in

Height

78 in

Weight (shipping, w/o lift)

3400 lb

Std Hopper Capacity

10.7 ft³

Exhaust Air

275 CFM

Temperature Exhaust Air

71 to 93 ºC
160 to 200
ºF

Manufacturer

Siemens

Note

Materials of Construction: 304 SS...Carbon Steel. Urethane Finish
Gas train components are IRI and FM approved, dryers are AGA approved. European dryers meet the EC Directive including VOE electrical and CE approved gas valve.
1 Optional on gas units


 MORE IMAGES 

·  Siemens J-Mate Continuous Drier-1M

·  Siemens J-Mate Continuous Drier-M


 DOWNLOADS 

JMateDryers
(PDF, 1497KB)


www.Core-Rosion.comSite created by ThomasNet Web Solutions and powered by Navigator Platform