Distributor and Manufacturer's Representative ofIndustrial Storage TanksWastewater Treatment EquipmentRelated Specialties

All Categories > BrineMaker Systems > Fiberglass Briners > Item # FRPBM15  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # FRPBM15, FRPBM15 Fiberglass Briner

Every component of your fiberglass BrineMaker has been designed to provide you with long term, maintenance free performance. And with more than 1,000 units installed, you can be confident that your briner will exceed your expectations. Our customer list reads like a “Who’s Who” of business and industry including auto manufacturers, system OEM’s, food processors, municipalities, refineries, hotels, hospitals, commercial laundries, textile dyeing houses, and chemical plants.

Unit of Measure: Imperial



15 Ton


8' x 8.5'

Features of The WASTESAVER

(1) Salt Fill Line- 4' 304SS Fully Radiused Inlet with Camlok, Cap, 3/4" Water Inlet Coupling, Supports as Required
(2) Brine Outlet- 2" Collection Plenum
(3) Top Manway- 24' Hinged/Spring Loaded Access/Emergency Pressure Relief
(4) Drain- 2' Flange with Dip tube and screen
(5) Dust Collection- 8' Vent with Dust Bag, Duct, Supports as Required
(6) Water Inlet- 1' Flange with Internal Spiral Distribution Head
(7) Anchor Lugs- 304SS as required for tank size and location
(8) Lifting Lugs- 304SS as required for tank size

Optional Features

(A) Salt Level Indication- 3' Flange with Smart Bob II Salt Level Indication System with LEF readout and 4-20ma output
(B) Side Manway- 24' Flanged Access with neoprene gasket and 304SS hardware
(C) Temperature Maintenance System- Heating Pads with Control Panel and Insulation to Prevent Freezing
(D) Brine Level Control- 3' Flange with Level Sensor and Valve (readout with 4-20ma available)
(E) Fiberglass Ladder- Ladder with either and Operator Safety Dock, Boarding Rails, or Safety Cage
(F) Gravel Bed- Quartz or Gravel Bed as specified by salt supplier
(G) Seismic Design- Available along with stamped calculations
(H) Food Grade Tank- Post Cure
1 Based on salt with a density of 70# per cubic foot


·  FRP-Briner-1

·  FRP-Briner-2

·  FRP-Briner-3

·  FRP-Briner-4

·  FRP-Briner-5

·  FRP-Briner-6

·  FRP-Briner-7

·  FRP-Briner-8


Typical Detail
(PDF, 537KB)

Guide Specification
(DOC, 52KB)

Brine Table
(PDF, 90KB)

www.Core-Rosion.comSite created by ThomasNet Web Solutions and powered by Navigator Platform